Firmware update NVMe en SATA SSD

Technical -> Hardware -> Samsung

"cd c:\Samsung

For SATA SSD ONLY

Samsung_SSD_DC_Toolkit_for_Windows_1.exe -L
Samsung_SSD_DC_Toolkit_for_Windows_1.exe -d 1 -S
Samsung_SSD_DC_Toolkit_for_Windows_1.exe -d 1 -F -p "c:\Samsung\SamsungFW\PM893_JXTC304Q_NF.bin"


X:\Program Files\UserTools\SamsungFW\
Samsung_SSD_DC_Toolkit_for_Windows_1.exe -L
Samsung_SSD_DC_Toolkit_for_Windows_1.exe -d 0 -F -p "X:\Program Files\UserTools\SamsungFW\PM863a_GXT5404Q_NF.BIN"


Samsung_SSD_DC_Toolkit_for_Windows_1.exe -d 1 -F -p "c:\Samsung\SamsungFW\PM863_GXT1203Q_NF.bin"

Samsung_SSD_DC_Toolkit_for_Windows_1.exe -d 1 -F -p "c:\Samsung\SamsungFW\PM883_HXT7B04Q_NF.bin"

Samsung_SSD_DC_Toolkit_for_Windows_1.exe -d 1 -F -p "c:\Samsung\SamsungFW\PM863a_GXT5404Q_NF.BIN"

Samsung_SSD_DC_Toolkit_for_Windows_1.exe -d 1 -F -p "c:\Samsung\SamsungFW\PM893_JXTC304Q_NF.BIN"


SSDManager.exe -L 

Geeft info weer over de disks aanwezig in the systeem, alsook de disk ID die later gebruikt moet worden.

SAS SSD firmware update

SSDManager.exe -d 1 -SF -u -p "c:\Samsung\SamsungFW\PM1643a_VFT6502Q_GXA4.bin"

/*basic fast update zonder gebruik van sloten */

NVMe firmware check slot info

SSDManager.exe -d 1 -NG -f

/*geeft in depth info over de actieve FW versie op disk met ID 1,

+ info van de gebruikte FW sloten op disk met ID 1*/

NVMe firmware update

SSDManager.exe -d 1 -NF -p "c:\Samsung\SamsungFW\PM9A3_U.2_GDC5902Q_Noformat.bin" -a 1 -s 2

/*basic fast update zonder gebruik van sloten 
-NF = FirmWare update || -a = action 0/1/2 || -s = fw slot 0-8 */ v

NVMe Change FW slot version

c:\Samsung>SSDManager.exe -d 1 -NC -a 2 -s 1

Samsung_SSD_DC_Toolkit_for_Windows_1.exe -d 0:c -F -p "c:\Samsung\SamsungFW\PM9A3_U.2_GDC5902Q_Noformat.bin"


SMART info from sas or NVMe -> user smartctl -> program installed on windows or linux

List disks : smartctl.exe --scan

Show smart info for disk /dev/sdb -> smartctl.exe -a /dev/sdb
"